Also, the DAC’s sound quality improves as the unit reaches its normal, stable operating temperature. This is because of the “bedding in” time taken by new electrical components inside the unit. The DAC will improve over time and start to sound really well balanced. If all is in order, the system is now ready to play music, and at last the sound of your compact discs will be tolerable! Red led on front panel confirms unit is on. Next turn on the DAC by using the rocker switch located on the back panel next to mains inlet socket. Once all the connections are complete, turn on the CD transport. Mains Connection: The DAC has an IEC mains inlet socket, use the supplied mains cable to connect the unit to the local mains supply. * Your dealer can advise on suitable type and quality of cable eg:- Audio Note cable is an excellent choice. Be sure to set the amplifier’s volume to minimum before making the following connections. Two sets of analogue outputs are provided for connection to your amplifier. Some special notes about digital cables - Try to use a digital cable of less than 1.5 metre in length. Plug one end of the coaxial cable into the RCA socket on the DAC (marked Digital Input) connect the other end of the coaxial cable to your CD transport (marked Digital Output). Select a suitable coaxial cable for digital use.* Coaxial cables for digital use are most commonly terminated with RCA connectors and so the DAC uses RCA type input sockets. Before making a connection, ensure that the DAC is turned off. Should the vacuum tubes require replacement, please contact your Audio Note dealer for technical support.Ī coaxial connection enables connection of the DAC to a CD transport or other digital sources. The vacuum tubes used in the DAC ZERO should provide a useful life span of about 3 years if the DAC is operated on a 12 hours per day, daily basis.Īlthough replacement tubes for the DAC ZERO are widely available, better performance will be obtained with tubes selected and matched specifically for theĭAC by Audio Note. Strong or alcohol based solvents may cause damage to the DAC’s finish. Use a cloth dampened with mildly warm water and a weak soap solution for removing grease or oily substances. Cleaning is best made with a soft cloth or brush similar to those sold by photographic stores for lens cleaning applications. No special maintenance is required for the DAC ZERO. Worthwhile sonic improvements may be obtained by locating the unit on a purposely designed audio component support system. In the interest of safe, reliable operation, situate the DAC away from dampness or direct sunshine. Next, select a suitable location for the unit, ensuring that adequate ventilation is provided (the vacuum tubes generate a fair amount of heat). We recommend that you store the packing materials in case the unit requires shipping at a later date.
Technology: Not surprisingly for an Audio Note™ product, the DAC uses vacuum tube technology, implemented using traditional Audio Note™ techniques.
AUDIO NOTE DAC 2.1 X BALANCED MANUAL
In order to obtain the best possible performance and longevity from your DAC, please read over this manual carefully.
AUDIO NOTE DAC 2.1 X BALANCED FREE
Although the DAC ZERO is a digital component (there is no avoiding this unfortunately!), it will bring a new level of musicality to your CD’s and is fatigue free during extended listening periods. The DAC ZERO is specifically engineered for sonic performance rather than technical specifications. Congratulations on your purchase of the Audio Note DAC ZERO.
0 kommentar(er)
